Unknown's avatar

About My2bts

Still radioactive..

Notes From Here

On that fiasco in WA,DC…I also found this article worth sharing:

Don’t Blame the Tea Party, Mainstream GOP Don’t Understand Debt Ceiling
By Nicole Belle

This is why we can’t have nice things with a Republican majority in Congress, people. And it’s this kind of obfuscation that makes sure that most Americans don’t understand what’s really going on.
Deflecting the rampant ignorance of the tea party on how government works, Tom Coburn proves that it’s not the lunatic fringe of the Republican Party that is the problem, the entire party is ignorant of what the debt ceiling is and how it works. Coburn ignores David Gregory’s disturbing touting of the debt ceiling as continuing leverage point (have you learned nothing from the last two weeks, you hack?) and complains about Congress still not cutting enough spending.

Well, David, first of all, I think the debt ceiling is a misnomer. We’ve never not increased it, and the first thing you do when you’re addicted to something is to present the reality to yourself that you’re addicted. And we didn’t do anything except create a big mess in Washington, and I’m not so inclined to think it was the tea party as much as it was outside interest groups and a few individuals within our party that took advantage of that situation. Look, the real problems are we’re continuing to spend money we don’t have on things we don’t need, there is tremendous amounts of waste and fraud. We have to protect the promises made to the American people, and we can do that, but we can do that spending a whole lot less money than we’re doing today.

Sigh. Coburn has been in office since 2005 and by my calculations, has been involved in nine debt ceiling raises in that time. One would hope he’d figure out what he was voting on at some point, but clearly it makes sense to him to be ignorant when there is a Democrat in the White House. I don’t recall this being an issue once during the debt ceiling raises during the Bush administration.

Part of the problem is, admittedly, the name “debt ceiling”. Every time there’s a call to raise the debt ceiling, it sounds like this is an issue of future spending, like asking your credit card company to raise your limit so that you can carry more debt. But raising the debt ceiling is to balance the books on PAST SPENDING. So to go back to that credit card analogy, what Coburn is suggesting is telling the credit card company that you’re not going to pay your balance because part of what you’ve already spent money on was irresponsible and wasteful, so you don’t want to pay for that. Ridiculous, right? The credit card company isn’t going to be sympathetic to that and neither should we any time a Republican says it. It doesn’t work that way.

Coburn, like all Republicans, is looking at this equation at the wrong end of it. The place to negotiate is not at the debt ceiling but at the budget. And in that, the Republicans have already won, because the sequester cuts have now been institutionalized. But as Harry Reid says, they haven’t learned to take “yes” for an answer.

Tags: Congress, David Gregory, Meet the Press, Republican Party, tea party, Tom Coburn, United States debt-ceiling crisis

Pics From Here

image

image

For any who may be at all in the slightest bit–and I do mean in the very teensy tiniest itsy bitsy bit here–at all interested on why I haven’t posted lately, well, here’s a few pics of my new digs now.  If you have had the chance to visit me before, you will see that this is certainly a much better improvement over my previous residence (of two years)–of which I was so unexpectedly and rudely ejected to be booted onto the street.  I should have seen this coming, though, leaving myself at the mercy of my political adversary of a roommate.  But live and learn.  At one point I got the bright idea I’d just use Google Maps to find a nice safe bush to live under, but then only to find that Boise has all their bushes carefully patrolled to prevent such a thing.  Why, they even created a special new ordinance now to run everyone poor off the streets, too!  And in these tough times no less!  So big of them, huh?  And let’s not leave out my pending eye surgery of which I’d have had to forgo if I couldn’t find a place to live…!  Fortunately, though, I was able to whine enough to the republican dog to buy an extra couple weeks, then lucked into a room till my name came up on Boise’s housing list, and finally–badabingbadaboom–I was saved!  I expect I’ll soon be back on course now, replete with the postings and comments of and on my various samplings of evening chow-creations put on by the Boise Rescue Mission. Quite apparently, I might add, for Someone’s amusement there; but of which I relish spewing on about with whatever verbage, garbage, and/or other gaseous nonsense there is to spout on about it about, which is how I maintain a sense of humor after my communions there, which I’m told I evidentally must have to be there in the first place…but which is actually more a love for ratting them out more than anthing…! Anyhoo, be all that as it may, it’s now onward and upward para moi!  My new address now finds me nicely strategically located near the Boise Greenbelt, where I can leisurely enjoy its fragrances and happy views of one of Boise’s finest assets (i.e. its river and trees)–rather than to be forced to live under them.  Yuppers, the Good Lord hath plunked me here in mine own Canaan; and now if the Good Lord will decide I’m worth keeping around (here), I promise to be a very very good person to people always!  Boy, Howdy on That!!!  Oh, Thank You Thank You So So Very Much, My Sweet Lord!!  Thou hast plunked me down and I rejoyce coninually in prayers of gratitude and worship.  Hallelujah and Armen!

imagea
image

Pics From Here

Downtown Boise enjoyed a nice bike parade today…and then they had this great little get-together afterwards down on the 8th Street cross-strip. The truck to the left parked sideways is a mobile stage–and I’ve got to say they can really belt out the noise with this thing!  Heck, you could hear all that thumping and booming blocks away!  First up was a group called Snakes and, although this old fudger would prefer names more like the Beetles, it was obvious the group had more than enough energy needed to jack the crowd. Complete with the aromas from the bistros dotting the street, this old man had a real pleasant downtown experience this evening…On-A-Warm-Boise-Idaho-Night…! 
image

Notes From Here

ATTENTION EVERYBODY! THE TIMES THEY ARE A-CHANGIN’!!!

Today’s complex global supply chains are poised to be dismantled (!)
http://tpt.to/a3HkGTs

Complete Article:

Today’s complex global supply chains are poised to be dismantled

By Paul Brody

Thanks to the growth of 3D printing, intelligent robots, and open-source hardware, tomorrow’s supply chains will be faster, smaller, cheaper, and local.

Nothing exemplifies the exceptional power and scale of today’s highest performing supply chains than the simple phrase: designed in California, assembled In China. Behind that elegant phrase are some of the world’s most sophisticated supply-chain processes, stitching together networks of suppliers, sub-assemblers and logistics companies around the globe.

Supply chains today are big, complex and global. Keeping them humming is an enormous challenge. But does it have to be that way? We think the world is entering the era of small, simple and local supply chains, powered by a new generation of manufacturing technologies such as 3D printing, intelligent assembly robotics and open-source hardware – also known as the Software Defined Supply Chain.

Simplification of chain lowers costs

It is evident that, over the next five years, most major consumer products will be cheaper and simpler to make using a software-defined supply chain than a traditional manufacturing process. In fact, on average, this new approach will result in products that are 23 percent lower in cost to make. Cheaper, however, is hardly new. What is new is the re-localization of the global supply chain and the radical simplification that is coming.

With low-cost robotic assembly and 3D printing, it is possible not only to make nearly any solid component, but it is also increasingly efficient to assemble whole products from those components using cheap, flexible robots.  The result will be supply chains that are much, much simpler. A new global IBM Electronics report indicates that the minimum scale required to operate and be cost competitive has declined by an average of 90 percent in a software-defined supply chain environment, with profound consequences for industry structure and competition.

The 3D printing revolution is not a decade or more away – it’s going to start showing up in mass production within the next five years. Despite skepticism, research demonstrates 3D manufacturing improvements combined with key patents will lead to a 79 percent reduction in average cost to print objects in five years, and a total of nearly 90 percent over the next 10 years.

Intermediaries cut from chain

One of the most likely effects from this is that many of the intermediaries that we depend on today for efficiency may no longer be necessary. For instance, mold and casting producers and specialized parts makers may be removed and replaced with a 3D printer; so, too, can many sub-assembly providers whose chief value proposition was labor cost arbitrage or to move the cost of capital equipment off the balance sheet.

Faster, customized products

Within the electronics industry, using open-source designs as a foundation on which to build, and leveraging the low cost of 3D printing and robotic assembly, it will be possible for companies to come to market much faster than ever before and to make products at reasonable prices in much lower volumes.

For consumers, we believe this will mean customized products and faster service. Live in an old house? We can make a washing machine that fits perfect in the odd space beneath the stairs. Need a spare part for it? The service technician will print one while you wait – no second visit required.

Producing hearing aids is already cheaper today using a software-defined supply chain, yet will be dramatically more so in the future largely as a result of 3D printing. Manufacturing a hearing aid will also require far fewer external suppliers, and the optimal supply chain will shift from one that is global or national today to a city level by 2022, according to IBM’s forecast.

Costs and optimal manufacturing locations for hearing aids by 2022 using a software defined supply chain

While hearing aids were the most dramatic of the products tested, the trend and results were the same everywhere: Big, complex and global is giving way to small, simple and local.

Partners may become competition

For enterprises moving into this new era, the opportunities are as enormous as the challenges. In order for businesses to reap the benefits, they will need to contend with a wave of potential new competitors. Many of these may be key suppliers that used to be part of their extended value chain.

Companies will also have to face the risk of product piracy that comes with fully digital manufacturing and design. Traditional sources of profitability are also under pressure, as customers may choose to print their own spare parts instead of buying them. In the end, no part of the value chain or competitive landscape will go unchanged.

You can read the full IBM report on the Software Defined Supply Chain here, or on the IBM IBV app available through iTunes and Android.

Paul Brody is vice president and global industry leader for electronics at IBM. He leads the electronics industry organization within IBM’s Global Business Services unit.

Notes From Here

The United Nations has proclaimed today 7-12-13 to be Malala Yousufzai Day. May God/Alla bless you Malala Yousufzai and your mission to the children of the world on this your most special day–proclaimed to the world by the world!

Meals From Here

Boise Rescue Mission Cuisine over the past two week period showed only one cookie. But, to their credit, I do recall there was a sampler cup of Chobani Greek yogurt as a cold treat…in lieu of the ultra rare appearance of ice cream. (Oh, darn, there I’ve said it and jinxed it!) Lots and lots of turkey for all us turkeys as you can plainly see…so gobble-gobble for us there! But, all-in-all, the serving sizes did seem better. I’ll give this sampling a C- for their lack of our friend, the Cookie.

Protests From Here

Protesters waved brightly colored signs along Curtis Road near the highway Friday morning as part of a protest against a recent Supreme Court ruling that tossed out restrictions on political campaign spending by corporations.The demonstrators were participating in the nationwide “Day of Action Against Corporate Personhood” touted by the Move to Amend group online. Carl Madison of Boise was among those holding signs and waving to cars during the morning rush hour. Madison said that he would support a constitutional amendment that would limit the rights and influence of major corporations.

http://www.idahostatesman.com/2013/05/10/2571181/citizens-united-protest.html